Machine Shops Seeking Loan in India

- We plan to start a fabricated metal factory. - The business has 3 directors who all have experience in the design industry. - Once we receive the funding we will be able to start the operations in 8-10 months. - We would produce the products for the aerospace industry. - The business is in the initial stage and only the registration has been done so far. - The business will require a power and pollution license once the factory is completed.

- Company providing injection moulded plastic parts to the electrical appliances industries. - Our main customers are OEMs and contract manufacturers of companies like Usha and Crompton. - We lay emphasis on quality and not quantity because aesthetics and shelf life are very important. - Our products are durable and are used in long-lasting electrical appliances. - The total output possible is 600 tons of PP products. - The production unit runs 24 hours and has 6 machines with 2 operators each. - Total 12 operators, 3 support operators, and 15 staff for factory housekeeping and product packaging. - Key-man risk as the owner/manager has to constantly supervise the operations. - The owner has been in this industry for 37 years now. - The company is established and reputed with its customers but is facing a liquidity crunch.

Injection moulding manufacturer that supplies products to major OEM companies. We had been operating since 1975 and recently registered it as a private company. We used to run two shifts (6 am - 2 pm and 2 pm to 6 am) Had around 10 clients such as Wapco ZF, Brakes India Limited, and others. The company unit was sealed 3 months back by the bank as we were not able to pay back the debt.

- Our business is currently engaged in fabrication of metal products like metal boilers and accessories. - On average, we manufacture 40 ton of fabricated metal products per month depending on the purchase orders. - We fulfil at least 12 purchase orders per year. - The facility has 2.5 acres of land which is unused and we plan to set-up a unit to recycle plastic and convert the same into shoes and garments. - We have identified 2 vendors from whom we will source the plastic. - Seeking a loan to purchase the machinery and get started on the same. We are looking for the machines on IndiaMart. - The business does not have any loans as of yet. - The business has a sole owner. - The recycling business will be carried under the same legal entity.

- We are traders of fabricated metal products mainly raw material made of steel used for industrial work. - We have 8-10 permanent customers along with one-time customers that belong to different industries. - Supply products on-demand basis. - We supply good quality material and provide fast delivery. - On average trade 15-20 tonnes of products per month. - Business is owned by one person and is debt-free.

- We manufacture plastic water tanks. - Have a capacity to produce 500 tanks per month. - Our products are sold to distributors on average of 400 per month. - The business did not have any operations last year due to the pandemic. - Have 3 suppliers for the raw material. - The business has not taken any loans yet.

- Private limited company manufactures and sells dies and moulds. - We have both domestic and international clients. - Clients come from the defence, consumer goods, and health care industries. - Revenue split of 50-50 between domestic and export market. - We supply to companies that are tier 2 and tier 3 suppliers to OEMs. - We have another legal entity in the same industry and we use its machinery to manufacture our products. There are no assets on the balance sheet of this private limited entity. - We require funds to acquire machinery under this private limited entity.

- Our business manufacture and supplies rubber molded rings & seals. - Business provides premium quality rubber rings and seals for water power hydraulics. - The company has served clients like UNICO, Tata, local industries in Karnataka. - Business has highly trained professionals who are trained to be skillful in installation, onsite operations to be able to handle large product lines. - The maximum production capacity is 230 units per week. - Our company has a dedicated R&D for quality assurance and innovative solutions. - We have had more than 55 +clients since our inception. - The promoter has 20 years of experience in the power hydraulic industry.

- Business is a manufacturing unit for automotive spare parts like steel coil and sheets. - We have a 3 acre factory that is running at full capacity to produce 6,000 ton steel raw material yearly. - Recently we have leased 2 new factories that will manufacture solely for the purpose of exporting. - We seek an investment to run the leased factories. Currently they are on a sampling phase for a high end buyer in Poland. - Materials are sourced from Tata Steel and other 10 local suppliers. - Raw material is sold to 60+ factories in North India for further manufacturing. - Owner has 25+ years of experience in this industry. - We are seeking a low amount as our net profit is less.

- We are manufacturers of customized metal fabrication products for industries and factories. - Company has been operational for more than 40 years and has developed a good reputation. - Our products are fabricated according to our clients requirements and they send us the drawings and designs. - We have the capacity to manufacture over 50 tonnes of metal products weekly but at present we manufacture around 100 tonnes monthly. - Have around 8 clients from Bangalore, out of which 5 clients are steady clients with contracts on a yearly basis while the rest come to us regularly on a monthly basis. - We have recently expanded our facility to a larger premise with a higher capacity, and we are looking to generate more business to meet our capacity. - Our facility also has 2 overhead cranes of 5 and 3 ton capacity respectively. - Promoter has over 8 years of experience running this business. - Company's physical assets include manufacturing machinery, cranes and equipment.

- Company has been operating for over 2 years and has 2 experienced directors. - One of the leading manufacturers of nets used in the fishing and agriculture process. - Our products are used in the fishing and agriculture industry mainly but also in the construction sector as safety nets. - We sell our products through dealers and have tied up with 5 distributors. - Currently our products have a good market base in Karnataka, Kerala and Tamil Nadu. - On a monthly basis we have a total capacity to produce 60 tons of nets and we operate at our total capacity. - The directors of the company have 30 years and 5 years of experience respectively in the industry. - Company's physical assets include machinery and manufacturing equipment.