Business Assets for Sale

Sale of brand-new, unused industrial machinery suitable for fabrication, engineering, and metalworking applications. - Assets include a powder coating machine, hydraulic bending machine, shearing machine, and cutting machine, all located in Trivandrum, Kerala. - The powder coating machine is designed for high-quality surface finishing and coating of metal components for industrial applications. - The hydraulic bending, shearing, and cutting machines support a wide range of sheet metal fabrication and manufacturing requirements. - All machines are brand new, unused, and ready for immediate installation and operation with no wear and tear. - The machinery was purchased for a business venture that was subsequently put on hold, and therefore has never been commissioned or used. - Offered as a complete package with an asking price of INR 32 lakh, making it suitable for businesses looking to establish or expand fabrication capabilities. - Ideal for fabrication workshops, engineering companies, metalworking businesses, and industrial manufacturers seeking ready-to-deploy equipment. - Holds GST registration. * Powder coating oven specification. - Inside dimensions: Length: 3800 mm (12.5"), width: 1800 mm (6"), height: 2100 mm (7"). - Overall dimensions: length: 4000 mm, width: 2400 mm, height: 2800 mm. - Circulation motor capacity: 2 HP × 2 nos (stark motor) - Heating source: Electrical. - Temperature control: Temperature-indicating controller with sensor. - Maximum temperature: 220°C. - Insulating thickness: 125 mm (96 density). * Machinery specification: + Supplier: Shree Lakshmi Engineers, Coimbatore. 1. H‑type hydraulic sheet bending machine - 8 ft working length, 2 mm bending capacity; 30‑ton hydraulic cylinder (two sides) with 5 HP motor power pack; H‑type frame (250 mm joist, 16 mm plate); EN8 grade V block and pump set; top die in standard sizes; 125‑liter oil tank; foot pedal control. 2. Hydraulic shearing machine - 8 ft working length, 1.6 mm bending capacity; 20‑ton hydraulic cylinder (two sides); 5 HP power pack with 150‑liter oil tank; clamping cylinder (10 nos); complete panel control with foot pedal settings. 3. Pipe bending machine - Pipe bending capacity up to 50 mm; 3 HP Crompton motor power pack with 100‑liter oil tank; 20‑ton hydraulic cylinder; 100 C‑channel and 10 mm pipe holding; die sets for 50 mm round pipe.

We have a KPME-registered diagnostic center with fully automated equipment, consultation space, reception area, waiting area, 10kv UPS (uninterrupted power supply), CCTV, and office space. - The lab has tie-ups with a few insurance companies to get patients. - The lab is not NABL accredited. - The leasee can expect a monthly revenue between INR 10-15 lakh with the proper marketing.

Fully equipped cloud kitchen available for rent in Lucknow. - Premises size: 250 sq. ft. with proper ventilation, self water connection, and ~8 kW power load. - Kitchen infrastructure includes a new combi oven, refrigerators, exhaust/chimney, and optional POS/CCTV system (if required). - No fryers are included in the setup. - Licenses: FSSAI, GST, and trade licenses available and transferable.

3.5 hectares of land with a 0.5-hectare mineral water lake for sale. - There are 2 small windmills and 6 wells on the land. - Official institutions have checked the lake for mineral waters. - It is a great area for bottled water manufacturing companies. - It is in close proximity to the cargo airport, railway, solar power plant, and the main highway. - It is owned by the owner of the company. - The land is in North Macedonia while the owner is in Slovenia.

Factory for sale with total area of 1 Acre, 22,000 sqft built-up area and shed with EOT crane. - Essential facilities such as a security room, office room, staff dining area, visitor area, LAN connection, CCTV, 150 HP power, and visitor parking are available with this industrial shed. - This is a SIPCOT leasehold property located at SIPCOT Gummidipoondi near to Sricity SEZ, Tada, Mahindra origin.

The rice mill, located in Redhills, Chennai, is available for lease. - The property spans 3 acres and has a 12,000 sqft built-up area. - The mill has a capacity of 100 tons/day, 300HP power, and 25 machines, all in working condition. - Labor is also available for lease along with the rice mill. - The location is suitable for manufacturing and warehousing, and it is conveniently situated near the outer ring road. - The property is owned by an individual. - No loans or debts associated with the asset.

5.2 acres of freehold land with building having 440 square meters built-up area owned by the promoter. - The building is located in the center of the city close to the governor's office area and an international hospital. - 12 bedrooms with balcony and attached washrooms. - The bedrooms have air conditioning, a TV, and a refrigerator. - Currently, we generate a monthly sale of IDR 2 million, and most of the days we have full occupancy. - Water utilities (PDAM), electric/power with token, garden, park, and front office.

This solar power plant is used for providing clean energy to the State of Haryana, there is a PPA with Haryana Power Purchase Center in place. - It is located in Haryana and cannot be relocated. - This asset provides clean energy and has a high PPA rate locked in with 20 years remaining. - Profile is listed by advisor whose business is based both in India as well as US.

We are into the hotel business. - Business is willing to lease out the hotel. - The hotel is a well-constructed building with a built-up area of 22,800 sq. ft. - It has a total of 6 floors (ground floor+5 floors). - The hotel is built on commercial land. - It has a lift, parking area, and Genset for power back-up. - The hotel is in a very good location and is 50 metres away from Taj Metro station. - We are willing to lease out the entire hotel including the parking area and the Genset. - Please note that we do not want to sell anything we only want to lease out. - The monthly rent mentioned is negotiable.

Vertical turning machine for immediate sale: Vertical Turning Lathe - Make Punjab, Batala. Table dia. 4500mm, Truning dia. 5200mm, Height 1800mm, Gear Box-4 speed, 3 Tool post. Motor - 15 KW. Surface Grinding attachment - 7.5HP - 2880 RPM. In good working condition. Machine is best suitable for machining of: power plant jobs like - coal grinding rings, cement plant jobs like - grinding segments, steel plants - big bell & hoppers, pallet plants - tyres & support rollers etc. Along with measuring Instruments like: - Mitutoyo Vernier Caliper - 2000MM. Mitutoyo Inside Micrometer - upto 3000MM. Bagson Stright Edge - 1500mm & 3000mm. Mitutoyo Vernier calipers - 1000 / 1500mm.

The factory is located in MIDC Ranjangaon, Pune and is equipped with 1 machine. The plot of land is of 10,000 sq ft and the building is constructed on 4,500 sq ft area. The building is brick wall with shed height of 8 m. The machine is a fully automatic servo machine. It is made to manufacture sanitary napkin of the size 230 mm with wings. The size of machine is 13m x 1m x 2m (L x W x H). The machine can alternatively make 230 mm non-wing sanitary napkin. The machine has yearly production capacity of 220 million pads. The machine requires power of 200 kW. Factory is strategically located with raw material suppliers in close proximity. Abundant labor, Transport hub connected to towns across the country. Near to Mumbai port giving quick access to import export business. Continuous power supply. An ideal business to start at this time when India boycotts Chinese products.

Company has developed a software solution for automated post-processing of intraday power trades. - Our software reads trades that are executed on the ComTrader platform by reading selected files in the local file system, post-processes the trade, and/or lets the user automate data transformations and send the results to configurable endpoints such as excel files, e-mails, databases, SOAP/REST web-services and much more. - Due to a private family situation, the promoter is no longer able to manage and market the solution and is looking for a successor. - We are offering all the relevant contents including source codes, documentation, presentation website (content + domain), and also the corresponding trademark (already registered). The asking price does not include the registered business entity. - Potential end customers for the software include EPEX SPOT exchange members using ComTrader. - There is no direct alternative available for this use case and at such a low cost. - We have not sold any licenses so far but the successor can sell the solution using a yearly license model that is renewable. - Technology stack used for development: Java and Spring Boot in the backend, and Vaadin Flow on the frontend. - Installation and operations manual are prepared with an average computer user in mind.